If you need to dig a trench, it’s a no-brainer to get a trencher. While you could dig a trench by hand, why would you do that? A trencher provides a smarter way to work, because it makes the task much easier and faster. You might be intimidated by the idea of using a trencher, but in fact, they are not complicated to use.
- Know where you’re digging before you start. Call your local utility company so that you don’t run into any underground wires or pipes.
- Prep the machine. First, turn the fuel switch on and give it some choke. Then, turn on the key switch, lower the throttle a little bit, and put the transmission in neutral. Make sure the hydraulic pump is off, and pay attention to the wheels. When you’re trenching, the wheels should be locked in place, and you should only disengage them when you want to move the unit. Once you get the unit running, give it some gas, activate the hydraulic pump, and move the transmission into forward gear.
- Start digging. When you’ve got the machine into position, engage the wheels so that they will work together. Moving the throttle up, throw the lever to start the chain and auger spinning, and lower the bar into the earth, at which point the trencher will begin digging. Lower it to the appropriate depth, which may take a few minutes. The auger will push the dirt to the side, and you’ll need to keep the gas on full throttle, controlling the speed with the transmission control.
- Move backward. When you’ve got the bar all the way down, put the machine in reverse and start moving backward. Never stand in front of the trencher when it’s running, because it will throw dirt and rocks forward.
Unless you’re digging trenches all the time, it’s probably not necessary to invest in purchasing one when you can just as easily rent one. A-1 Equipment Rentals offers the best equipment rental in Redwood City, California, with a great selection of construction equipment as well as an extensive machine and tool inventory. Whether you’re a homeowner tackling a home improvement or landscaping project or a business owner who isn’t quite ready to invest in a fleet of vehicles, we have what you need to get the job done. In addition to tools and machinery, we have a varied selection of trucks, dump trucks, and vans available, and we offer pickup and delivery service to save you the trip to our facility. Our experienced maintenance staff fixes our machinery on site, and we extend repair and maintenance services to our clientele as well. Our team members are here to make sure you have what you need to make your job go smoothly, and we’re happy to offer advice on the machinery and tools you need. To learn more about our quality options at affordable prices, contact us through our website or call (650) 369-2992 and we’ll be happy to help.
When planning a wedding, your goal is to make the venue as elegant and comfortable as possible for your guests. For example, if you’re planning an outdoor wedding, you should consider getting a tent from a party rental company to protect your guests from rain or sun. If you do, you’ll also want to consider tent lighting.
In this video, a bride-to-be offers some excellent suggestions for what kind of lighting to use in a rental tent. Her suggestions include white holiday lights, icicle lights, and globe string lights. If you get the latter, consider placing round lanterns around them for a truly elegant look. The woman in this video compares white 8-inch lanterns with beige 12-inch lanterns, but you can experiment with many other sizes and colors.
Your siding plays an important role in the curb appeal of your house, so it is a good idea to keep it in top shape. Once you have assembled your equipment rentals and removed your existing siding, you can put up your replacement in a matter of minutes. Continue on for a step by step guide to replacing vinyl siding.
Gather Your Materials
Broken, rotting, or otherwise unattractive siding can bring down your curb appeal, but it’s typically a straightforward fix. Before you start, however, you will need to assemble the necessary tools. The good news is that you shouldn’t need much equipment to replace your vinyl siding. You will need a pry bar, a zip tool, and new siding to replace the old siding. These tools tend to be on the cheaper side, and they can be even cheaper if you rent them.
Remove Existing Siding
Once you have gathered your materials, the first step is to remove the undesirable siding. Start by using your zip tool to separate the old siding from its surroundings. You can then use your pry bar to remove the nails from the siding and take the piece down. With your existing siding out of the way, all that’s left to do is place your new siding.
Replace with New Siding
Your new piece of siding should fit comfortably within the space left by the old piece that you removed. Hook the new piece into place, using roofing nails to keep everything in place. Now use your zip tool again, this time to lock down the above piece of sliding over your replacement piece. Try to avoid replacing your vinyl siding during the winter, as lower temperatures can make the siding less flexible and more prone to cracking.
A-1 Equipment Rental Center is your one stop shop for tools and equipment rentals. It is our mission to offer a wide array of high quality equipment rentals in Oakland. For more information about our dollies, tractors, and other equipment and event rentals, feel free to visit our website or call us at (650) 369-2992 today.
Replacing a deck post may seem like a daunting task, but it is a relatively simple process. Watch this video clip for a look at deck post replacement and what equipment rentals you’ll need.
Before you remove an old deck post, you’ll need to set up shoring to hold the weight of the deck. You can then remove the old post as well as its nails and brackets. Use a post base to keep the deck post from uplift; after drilling a hole and setting the post base, put a metal fastener into the hole. Then measure your new post and place it into the base.
A-1 Equipment Rental Center is happy to offer air compressors, drills, and many other equipment rentals in San Mateo . If you’d like to learn more about our event rentals, please feel free to call us at (650) 369-2992 or stop by and see us.
The way you pour your concrete slab will affect its durability and structural integrity, so it’s important that you have some idea of what you are doing. It also helps to use the right type of equipment rentals. Keep reading for a few tips on pouring a concrete slab.
As long as you are equipped with the right tools, pouring a concrete slab is not a particularly extensive task. Depending on the exact nature of your project, you might need a wheelbarrow, a trowel, shovel, rebar cutter, and bull float. Once you have laid out the area for your slab and filled it with sand, use rebar to protect your support base from cracks. Pour the concrete and avoid adding too much water, then trowel the surface. Cut control joints so the concrete has somewhere to crack, and make sure you keep the area damp for about a week.
If you are looking for equipment rentals in Redwood City to help you with your concrete project, please do not hesitate to contact A-1 Equipment Rental Center or visit our website. Our specialties include air tools, generators, and moving equipment. Give us a call at (650) 369-2992 to learn more about how we can help.
Sorry. No data so far.
- Cleaning Equipment
- Power Tools
- Landscaping Equipment
- Construction Equipment
- Air Tools
- Home Renovations
- Event and Party Rentals
- Dolly Rentals
- Gas-Powered Tool Safety
- Water Damage Equipment
- Generator Rentals
- Party Rentals
- Tool Rental
- Truck Rental
- Post Holes